How many cool, dry hours does a Miami roofer get each month?
From 2014 to 2024, the average March day at Miami International had about 11 dry daylight hours with the heat index under 90°F, the National Weather Service's Extreme Caution line. The average August day had about one, though under the 103°F Danger line August still kept about 10, against about 12 in April.
Averages of 11 years and 96,310 hourly readings, measured in the shade at the airport. Every one of those years landed in a narrow band: March between 10.9 and 11.7 hours under 90°F, August between 0.5 and 2.0.
Reading one hour
Aug, 1 p.m.
- Daylight
- 100% of days
- Heat index 90°F or more
- 88% of days
- Heat index 103°F or more
- 18% of days
- Rain or thunder
- 24% of days
Tap or hover any wedge. Inner ring is January, outer ring is December. Noon sits at the top. Hours are local clock time, with daylight saving applied.
How many dry daylight hours fall under each heat line?
Dry daylight hours on an average day, 2014 to 2024. From June to September the solid bar, under 90°F, falls to between 1.1 and 3.6 hours. The outline, under 103°F, stays between 10.0 and 11.2.
When do Miami roofing permits peak?
In the county permit feed, roofing permits averaged about 1,130 in March and 1,190 in April, the two busiest months, against about 870 to 900 a month from November to January. March and April are also the two months with the most dry daylight hours under 90°F. That is a pattern, not a cause. Permits also come after the phone call, since a permit gets pulled once the job is sold. County building department permits only, mostly unincorporated Miami Dade; the City of Miami, Hialeah and Miami Beach issue their own. Source: BuildWithBooz Miami Trades Data Brief, Nov 5, 2026, averages of November 2024 to October 2026.
What can a roofer do with this?
- Put the big tear offs in March and April. Over these 11 years they averaged about 11.3 and 10.6 dry daylight hours under 90°F, and in 16,074 routine hourly readings from those two months the heat index never once reached 103°F.
- In July and August, start at first light. At 7 a.m. in August the heat index was under 90°F on about 4 days in 10. By 9 a.m. it was 90°F or more on about 13 days in 14.
- Keep estimates and inspections out of midday in summer. In August, Danger level heat showed up most from 11 a.m. to 3 p.m., on up to about 1 day in 5, and rain or thunder peaked from 1 to 4 p.m., on about 1 day in 5 to 1 day in 4.
What does this measure?
Hourly readings from the NOAA weather station at Miami International Airport, January 2014 to December 2024, shown in local clock time with daylight saving applied.
Heat index uses the National Weather Service formula. Categories follow the NWS: Caution 80 to 90°F, Extreme Caution 90 to 103°F, Danger 103 to 124°F, Extreme Danger 125°F or higher.
What doesn't it measure?
Station readings are taken in the shade. The NWS says full sunshine can raise the heat index by up to 15°F. A roof in full sun is hotter than this chart.
An hour counts as rainy when the airport logged measurable rain or reported rain, showers or thunder. Storms are local, so a job site a few miles away can differ.
Where do the numbers come from?
NOAA Local Climatological Data, station 72202012839.
NWS heat index categories and NWS heat safety.
Roofing permits: Miami Dade County building permits feed, permits whose description mentions a roof (a rough filter), November 2024 to October 2026. County building department only, mostly unincorporated Miami Dade.
When rain stops the crew at 1 p.m., the office is still open. Those are the hours when callbacks and estimates get handled, or go cold.
When a roofer is up top, who answers the phone? Run the Gap Finder to see what happens to those calls.